|
Post by TOOLTIME on Jan 5, 2010 19:18:15 GMT -6
I am purchasing a used Clarke Sandblaster Cabinet off Craigslist. I need a new bigger compressor.
Here is what the unit says it needs: REQUIRES: 12 CFM air supply, 40 80 PSI working pressure
Without breaking the bank, what should i look for when searching for my new buy?
Thanks, Tim
|
|
|
Post by all out on Jan 5, 2010 19:22:32 GMT -6
sweet can i use it actually vince has a sandblasting box i will ask him in the am what size his compressor is
|
|
cda1
TRAIL RIDER
Posts: 47
|
Post by cda1 on Jan 5, 2010 19:39:51 GMT -6
tim i would go back and look on craigslist. i do believe that it is going to be a pretty good size compressor.
|
|
|
Post by sandman13 on Jan 5, 2010 19:44:00 GMT -6
Just don't focus on size of the compressor.. Look at the cubic feet per minute (CFM) The higher cfm's the better..
|
|
cda1
TRAIL RIDER
Posts: 47
|
Post by cda1 on Jan 5, 2010 19:45:37 GMT -6
|
|
|
Post by 4wheelerfun on Jan 7, 2010 19:58:33 GMT -6
I use a 5 hp single stage but really would like a two stage compressor, a two stage will run slower with less noise and would be better for paint work.
|
|